Press Releases

2021


JPE Welcomes New Inside Sales Rep

Seattle, WA – Jet Parts Engineering (JPE) is pleased to announce the addition of Hunter Sorenson to its Inside Sales team. Hunter will serve as Account Manager at JPE’s Seattle headquarters.
90.41 KB. Published on July 2021.


JPE Announces New Regional Sales Manager

Seattle, WA – Jet Parts Engineering (JPE) is pleased to announce the recent promotion of Chris Gardner to Regional Sales Manager for the central US territory. Chris is based in Tulsa, OK.
139.27 KB. Published on May 2021.


JPE Announces Approval of 22 New PMA Parts

Seattle, WA – Jet Parts Engineering (JPE), along with subsidiary Aero Parts Mart, recently received FAA approval on 22 new PMA parts. Some of these parts include CF34 engine cowl seals, aircraft interior items, APU conduit hardware, 737 landing gear bearings, 747/757/767 anti-collision light lenses, flight control actuation hardware, and fuel control seals.
149.87 KB. Published on May 2021.


JPE Announces Approval of 15 New PMA Parts

Seattle, WA – Jet Parts Engineering (JPE), along with subsidiary Aero Parts Mart, recently received FAA approval on 15 new PMA parts. Some of these parts include 777 landing gear hardware, 737 anti-collision light lens assemblies, 737 and A320 APU conduit grommets, E170 pilot seat cables, and a CRJ food tray liner.
112.81 KB. Published on March 2021.

2020


JPE Acquires AeroSpares

Seattle, WA – Jet Parts Engineering (JPE), a leading PMA parts supplier, today announced the acquisition of AeroSpares. AeroSpares was founded in 1993 to provide airlines with alternate means of customer support, and focuses on reducing aircraft and engine direct and indirect costs with FAA approved replacement parts for a variety of large commercial aircraft.
100.24 KB. Published on December 2020.


JPE Announces Approval of 18 New PMA Parts

Seattle, WA – Jet Parts Engineering (JPE), along with subsidiary Aero Parts Mart, recently received FAA approval on 18 new PMA parts. Some of these parts include engine nacelle seals, flight control actuation filter caps, landing gear lock washers, overhead stowage compartment fittings, light lenses, and armrest pads for pilot and copilot seating.
417.91 KB. Published on December 2020.


JPE Announces Approval of 13 New PMA Parts

Seattle, WA – Jet Parts Engineering (JPE), along with subsidiary Aero Parts Mart, recently received FAA approval on 13 new PMA parts. The most recent additions are component, airframe, and interior parts applicable to 737 NG and MAX, A320, 777, and regional CRJ aircraft. Some of these parts include seals for landing gear wheels, light lenses, flight control actuator bushings, engine and gearbox seals, and a buckle pad for a crew seat restraint.
153.15 KB. Published on September 2020.


JPE Announces Approval of 22 New PMA Parts

Seattle, WA – Jet Parts Engineering (JPE), along with subsidiary Aero Parts Mart, recently received FAA approval on 22 new PMA parts. The most recent additions are component, airframe, and interior parts applicable to regional ERJ, CRJ, and Q400 aircraft along with B737NG, B757, and A320s. Some of these parts include engine cowl and flight control surface seals, wingtip baffles, an under-seat life vest container, a ceiling light lens, nacelle door strut and rod assemblies, wingtip light lens assemblies, wheel assembly parts, an armrest pad, and a pneumatic valve poppet.
158.42 KB. Published on April 2020.


JPE Acquires Aero Parts Mart

Seattle, WA – Jet Parts Engineering (JPE), a leading PMA parts supplier, announced the acquisition of Aero Parts Mart (APM). APM is a Fort Worth, TX-based engineering design company that provides cost savings solutions through the design, production, and distribution of products to the regional segment of the aviation industry.
102.88 KB. Published on January 2020.

2019


JPE Announces Approval of 17 New PMA Parts

Seattle, WA – Jet Parts Engineering (JPE), a leading PMA parts supplier, recently received FAA approval on 17 new PMA parts. The most recent additions to JPE’s extensive offerings include interior seat track covers that apply across a broad range of Boeing aircraft, thrust reverser seals for the ERJ platform, anti-collision position lenses and hardware, along with various other parts.
131.93 KB. Published on December 2019.


JPE Welcomes New Sales Representatives

Seattle, WA – Jet Parts Engineering (JPE) is pleased to announce the recent addition of two new members to its Sales team: Daniel Taylor, Sales Manager, and Yu Chin Teo, Sales Director for Asia-Pacific.
98.69 KB. Published on September 2019.


JPE Announces Approval of 13 New PMA Parts

Seattle, WA – Jet Parts Engineering (JPE), a leading PMA parts supplier, recently received FAA approval on 13 new PMA parts. The most recent additions to JPE’s extensive offerings include a turbine clearance valve bolt, air filter, thrust reverser seals and fitting assemblies, anti-collision light reflectors, and engine mount sleeves.
112.3 KB. Published on August 2019.


JPE & TurbineAero Co-Hosted Customer Symposium

Bangkok, Thailand – Jet Parts Engineering (JPE) and TurbineAero, a portfolio company of The Gores Group, joined forces on 13 August 2019 at a private Cost Savings Symposium in Thailand.
103.89 KB. Published on August 2019.


JPE Welcomes New Sales Directors

Seattle, WA – Jet Parts Engineering (JPE) is pleased to announce the recent addition of two new members to its Sales team: Andrew Bonefas, Regional Sales Director for Western North America, and Pascal Lethien, Regional Sales Director for Europe Key Accounts.
99.35 KB. Published on April 2019.


JPE Announces Approval of 18 New PMA Parts

Seattle, WA – Jet Parts Engineering (JPE), a leading PMA parts supplier, recently received FAA approval on 18 new PMA parts. The most recent additions to JPE’s extensive offerings include a galley quarter-turn retainer, elevator feel system diaphragms, switch assemblies, mic wire assembly, waste tank drain valve mod seal kit, solenoid assembly, engine mount end cap, stage 2 & 3 engine shrouds, packing, and HTP L-seals.
120.22 KB. Published on March 2019.

2018


JPE Announces Approval of 12 New PMA Parts

Seattle, WA – Jet Parts Engineering (JPE), a leading PMA parts supplier, recently received FAA approval on 12 new PMA parts. The most recent additions to JPE’s extensive offerings include a food tray plug, chafe guards, clear lens assembly, retainers, floor seal, gasket, wearpad, arm assembly, and piston ring set.
112.15 KB. Published on November 2018.


JPE Partners with Vance Street Capital

Seattle, WA – Jet Parts Engineering (JPE), a leading PMA parts supplier and repair solutions provider, announced its recapitalization by Vance Street Capital LLC today.
109.6 KB. Published on July 2018.


JPE Announces Approval of 8 New PMA Parts

Seattle, WA – Jet Parts Engineering (JPE), a leading PMA parts supplier, recently received FAA approval on 8 new PMA parts. The most recent additions to JPE’s extensive offerings include a switch cover, lanyard assembly, piston ring set, actuating rod, poppet, matched set poppet and guide, seal and float.
106.86 KB. Published on June 2018.


JPE Announces FAA Approval of 8 New PMA Parts

Jet Parts Engineering has added 8 new parts to our PMA lineup.
213.78 KB. Published on June 2018.


JPE Announces FAA Approval of 23 New PMA Parts

Jet Parts Engineering has added 23 new parts to our PMA lineup.
1.12 MB. Published on March 2018.

2017


JPE Announces Approval of 38 New PMA PArts

Seattle, WA – Jet Parts Engineering, a leading PMA parts supplier recently received FAA approval on 38 new PMA parts. The most recent additions to Jet Parts Engineering’s extensive offerings include bushings, depressors, pins, spherical bearings, rod ends, shroud retainers, packings, as well as lens, end fitting and link assemblies. These fit on a variety of applications ranging from regional jet engines, all the way up to 747-400s.
115.12 KB. Published on July 2017.


JPE Announces FAA Approval of 38 New PMA Parts

Jet Parts Engineering has added 38 new parts to our PMA lineup.
888.23 KB. Published on July 2017.


JPE Announces FAA Approval of 17 New PMA Parts

Jet Parts Engineering has added 17 new parts to our PMA lineup.
854 KB. Published on February 2017.

2016


JPE Announces Approval of 10 New PMA Parts

Seattle, WA – Jet Parts Engineering, a leading PMA parts supplier recently received FAA approval on 10 new PMA parts. The most recent additions to Jet Parts Engineering’s extensive offerings include capacitors, pump sleeves, stators, seal rings, as well as yoke and orifice assemblies. These fit on a variety of applications ranging from regional jet engines, all the way up to 747-400s.
121.83 KB. Published on September 2016.


JPE Announces FAA Approval of 10 New PMA Parts

Jet Parts Engineering has added 10 new parts to our PMA lineup.
394.99 KB. Published on July 2016.


JPE Announces Approval of 20 New PMA Parts

Jet Parts Engineering, a leading PMA parts supplier recently received FAA approval on 20 new PMA parts. The most recent additions to Jet Parts Engineering’s extensive offerings include bushings, washers, shaft guides, latches, bumpers and FADEC resilient mounts. These fit on a variety of applications ranging from regional jet engines, all the way up to 747-400s.
111.37 KB. Published on April 2016.


JPE Announces FAA Approval of 20 New PMA Parts

Jet Parts Engineering has added 20 new parts to our PMA lineup.
467.03 KB. Published on March 2016.

2015


JPE Announces FAA Approval of 22 New PMA Parts

Jet Parts Engineering has added 22 new parts to our PMA lineup.
346.95 KB. Published on December 2015.


JPE Announces FAA Approval of 14 New PMA Parts

Jet Parts Engineering has added 14 new parts to our PMA lineup.
368.67 KB. Published on April 2015.

2014


JPE Announces FAA Approval of 11 New PMA Parts

Jet Parts Engineering has added 11 new parts to our PMA lineup
261.59 KB. Published on September 2014.


JPE Announces FAA Approval of 12 New PMA Parts

Jet Parts Engineering has added 12 new parts to our PMA lineup.
539.93 KB. Published on April 2014.


JPE Announces FAA Approval of 14 New PMA Parts

Jet Parts Engineering has added 14 new parts to our PMA lineup
576.3 KB. Published on March 2014.


JPE Announces FAA Approval of 14 New PMA Parts

Jet Parts Engineering has added 14 new parts to our PMA lineup.
553.28 KB. Published on January 2014.

2013


JPE Announces FAA Approval of 8 New PMA Parts

Jet Parts Engineering has added 8 new parts to our PMA lineup.
353.85 KB. Published on November 2013.


JPE Announces FAA Approval of 13 New PMA Parts

Jet Parts Engineering has added 13 new parts to our PMA lineup.
231.43 KB. Published on September 2013.


JPE Announces FAA Approval of 15 New PMA Parts

Jet Parts Engineering has added 15 new parts to our PMA lineup.
322.97 KB. Published on July 2013.


JPE Announces FAA Approval of 16 New PMA Parts

Jet Parts Engineering has added 16 new parts to our PMA lineup.
545.97 KB. Published on May 2013.

2012


JPE Announces FAA Approval of 14 New PMA Parts

Jet Parts Engineering has added 14 new parts to our PMA lineup.
435.69 KB. Published on November 2012.


JPE Announces FAA Approval of 26 New PMA Parts

Jet Parts Engineering has added 26 new parts to our PMA lineup.
141.62 KB. Published on September 2012.


JPE Announces FAA Approval of 16 New PMA Parts

Jet Parts Engineering has added 16 new parts to our PMA lineup.
497.98 KB. Published on May 2012.

2011


JPE Announces FAA Approval of 25 New PMA Parts

Jet Parts Engineering has added 25 new parts to our PMA lineup.
667 KB. Published on October 2011.


JPE Announces FAA Approval of 13 New Parts

Jet Parts Engineering has added 13 new parts to our PMA lineup.
403.91 KB. Published on June 2011.


JPE Announces FAA Approval of 29 New Parts

Jet Parts Engineering has added 21 new parts to our PMA lineup.
915.44 KB. Published on February 2011.

2010


JPE Announces FAA Approval of 25 New Parts

Jet Parts Engineering is pleased to announce the addition of 25 new parts to our PMA lineup.
136.8 KB. Published on October 2010.


JPE Announces FAA Approval of 21 New Parts

Jet Parts Engineering has added 21 new parts to our PMA lineup.
760.06 KB. Published on July 2010.


JPE Announces FAA approval of 17 New Parts

Jet Parts Engineering has added 17 new parts to our PMA lineup.
591.92 KB. Published on May 2010.


JPE Announces Approval of 9 New PMA Parts

Jet Parts Engineering has added an additional 9 parts to our PMA lineup.
264.96 KB. Published on March 2010.